NEW ELECTRONIC TECHNOLOGY
Europe: +49 8806-9234-0   USA Central North: +1 219-934-9042
Japan: +81 45-478-1020 USA Central South: +1 636-244-7200
USA West Coast: +1 775-691-1823
USA East Coast: +1 508-393-0814
 
 
 

M124MP

> Back to Overview
   
 

Type

M124MP

Image sensor 1/3" Interline CCD ICX424AL-6
Active Pixel 659 (H) x 494 (V)
Pixel Size 7.4 (H) x 7.4 (V) µm (square grid array )
Image Area 4.8 (H) x 3.6 (V)mm
TV System Conform to EIA
Video Output Format

1/60s non-interlace-mode = 60 fps

1/30s non-interlace mode = 30fps

Aspect Ratio 4:3
External Sync Input Signal HD/VD
Input Level TTL
Trigger : Input Level LOW level: 0-0.5V(p-p), HIGH level: 4-5V(p-p)
Input Impedance High mpedance (10k Ohm)
Scanning lines 525 lines
Interlace 1/60s non-interlace / 1/30s non-interlace
Sync system

Internal / External

Video output

VS1.0V(p-p) / 75 OHM

Resolution

485 TV lines (H)

Signal / noise Standard: 56 dB (p-p) rms
Illumination

Minimum: 1Lux (F1.4 1/60s)

Gain

0 dB ~ 32 dB

Gamma correction 1.0 / 0.6 / 0.45
Shutter specification

Shutter Speed setting via rear panel SW (Initial: OFF)

8 steps selectable (=OFF; 1/100s, 1/25s, 1/500s,

1/1000s, 1/2000s, 1/4000s, 1/10000s

White clip level

Approx. 840mV (p-p) (Excluding SYNC)

Power source

DC5V +/-10%, Ripple Voltage: <50mV(p-p) or less

Power consumption Approx. 400mA (2W)
Lens mount M12 mounting thread
External dimension 22 (W) x 22 (H) x 22 (D) mm
Weight Approx. 30 g